USB Charging Rolling Tumbler Operation Manual

1. Place core when gear hole aim at the big pillar of shell.

2. Once shell's marking line aligned, place the small pillar shell to core, then rotate 60°in direction of the "CLOSE".

3. Charge the product until indicator light turns off.

4. Insert the pole firmly into the hole on the top. The pole is install successful if it is lift product up.

5. Press "MODE" to select prefered play mode.

    A. Press 2s to power on and enter rolling lights mode.

    B. Press again to enter rolling lights sounds mode.

    C. Press switch to change mode randomly in power-on state, press 2s one more time to power it off.

6. It will play 1 minute in any mode and reactive by touch. It will auto power off without any touch after 4 hours. (Light will flash every 3s while waiting for activation)

7. The battery is low if product slows down or intermittent rolling, please use USB cable to charge, the light is always on during charging and will go out once fully charged.